Ricoh PJ WX4153N, Operating Instructions Manual

Page: 34 / 176

Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.
Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
CZE116
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed
HDMI cable. A conventional HDMI cable may not work properly.
Connecting to the Y/Pb/Pr out port
Connect a D-sub to component video cable to the Computer In port of the projector and to the Y/Pb/Pr
out port of the AV equipment. To output audio from the speaker on the projector, connect an audio
cable to the Audio In port of the projector and to the audio out port of AV equipment.
CZE118
Connecting an External Speaker
You can output the audio signal to an external speaker. To connect an external speaker, connect an
audio cable to the Audio Out port of the projector and the audio in port of an external speaker.
CZE119
• There is no sound output from the projector's speaker when an external speaker is connected.
1. Preparations for Using the Projector
32