Ricoh PJ WX4153N, Operating Instructions Manual

Page: 27 / 176

Removing batteries
DHY115
1 2 3
1. Remove the battery cover from the remote control.
2. Remove the batteries.
3. Close the battery cover.
Operating Multiple Projectors with the Remote Control
You can operate multiple projectors with a single remote control. It is possible to operate a maximum of
four projectors. To operate the projector with the remote control, you must assign the same ID number to
the projector and remote control. The projectors that can be operated by the supplied remote control
are the RICOH PJ WX4153 series.
Use the following procedure to assign the same ID number to the projector and the remote control.
Assigning an ID number to the projector
To operate multiple projectors with a single remote control, assign a different ID number to each
projector.
Use the buttons on the control panel to perform the following procedure.
1. Press the [Menu] button.
2. Select [Default Settings 2], and then press the [ ] button.
3. Select [Remote Control ID], and then press the [Enter] button.
How to Use the Remote Control
25