Removing batteries
DHY115
1
2
3
1.
Remove the battery cover from the remote control.
2.
Remove the batteries.
3.
Close the battery cover.
Inputting Text
Use the keyboard that is displayed on screen to input text on the setting screen.
1.
Select a character using the [ ], [ ], [ ], and [ ] buttons.
The selected character is highlighted in orange.
2.
Press the [Enter] button.
The selected character appears in the text area.
3.
After inputting all the characters, select [OK].
4.
Press the [Enter] button.
• You can also use the number buttons on the remote control to input numbers.
Operating Multiple Projectors with the Remote Control
You can operate multiple projectors with a single remote control. It is possible to operate a maximum of
four projectors. To operate the projector with the remote control, you must assign the same ID number to
the projector and remote control. Projectors that can be operated by the remote control supplied with
this projector are RICOH PJ WX4152/WX4152N/WX4152NI.
Use the following procedure to assign the same ID number to the projector and the remote control.
1. Preparations for Using the Projector
24
Summary of Contents for PJ WX4152
