Ricoh PJ WX4152, Operating Instructions Manual

Page: 138 / 196

Item Default
PJLink Password
Enter a password used when setting the PJLink authentication. Up to
32 alphanumeric characters can be used.
(blank)
Security
Item Default
Administrator Authentication
Specify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
• Changing [Transmission WEP Key Number], [Network Key], [EAP
Type], [Client Certificate User Name], [MS-CHAP v2 User Name],
[MS-CHAP v2 Password], [Windows Domain Name], [Server
Certificate Authentication], [Intermediate CA Permission], [Crestron
WebUI User Auth.], [Crestron WebUI User Password], [Crestron
WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink
Authentication], and [PJLink Password]
• Using the simple wireless LAN setup function and Network Setting
Wizard
• Importing, deleting, or displaying client or CA certificates
• Turning the projector on or off via a network
• Changing the settings using Web Image Monitor
• Executing [Reset Security Settings]
Off
Administrator Password
Enter the administrator password. Up to 32 alphanumeric characters can
be used. The current password is required to change the administrator
password.
(blank)
Application Authentication
When projecting images using an application installed on a smart device,
specify whether or not to enter the application password.
Off
7. Changing the Projector Settings
136