Ricoh PJ WX4130, Setup Manual

Page: 9 / 22

Connecting Equipment to the Projector
• Do not place the power cord and connection cable in a way that might cause someone to trip
and fall. The product might fall over and cause an injury.
Various equipments can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.
Connecting a Computer
Connect an RGB cable to the Computer In port of the projector and to the RGB output of a computer. To
input audio signals, connect an audio cable to the Audio In port of the projector and to the audio output
of a computer.
If an HDMI interface is available on a computer you want to use, connect an HDMI cable to the HDMI
ports of the projector and the computer.
CLB025
2
1
3
1. To the audio output
2. To the HDMI port
3. To the RGB output
Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.
To connect a DVD recorder, connect a conversion adapter BNC-pin to the Computer In port of the
projector and to the Y/Pb/Pr output of the recorder.
To connect a video recorder or a DVD player, connect a video cable to the Video In port of the
projector and to the video output of the recorder or the player.
Connecting Equipment to the Projector
7
1