Ricoh PJ WX4130, Setup Manual

Page: 13 / 22

2. Projecting an Image
Basic Operations
• Do not look into the projection window or vent when the product is on. The bright light may
damage your eyes. Be especially careful in an environment with children.
• Do not place low heat resistant material near the exhaust vents. Hot air may come from the
exhaust vents, resulting in damage to the product or an accident.
• Do not block the projection light when it is on. If you do so, the part that is blocking the
projection light may get quite hot and deform, deteriorate or cause a burn or fire. The reflected
light may make the projection window hot and cause a product failure. To temporarily suspend
projection, select the mute function. To suspend longer, turn off the product.
• Unplug the power cord if the projector will not be used for an extended period of time.
• If the lamp is used for an extended period of time, it may not light up or the image may become
dark. If this happens, replace the lamp. In some rare cases, the lamp's brightness may vary slightly
due to the characteristics of a lamp.
Turning On the Projector
Make sure that the power plug is inserted into a power outlet. For details, see p.9 "Connecting the
Power Cord".
11
2