Ricoh PJ K360, User Manual

Page: 41 / 58

39
English
User Controls
Options
Select [Options] from the Main Menu (see “How
to operate menu” on page 29) and then select the
item from the Sub Menu.
Auto Source
Set the automatic signal search function when power on
or the source of the signal being received is lost.
Press ▲▼ to select [Auto Source]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Press ◄► to switch [On]/[Off]. 3)
On
It will automatically search and
display the signal sources marked
in the [Options]-[Input] when power
on or the source of the signal being
received is lost.
Off
When the source of the signal being
received is lost, it will not search
other sources.
Search and display order: [Computer 1]
y

[Computer 2]

[HDMI]

[Video]

[Computer
1]

.
Input
Set the automatic search signal source for [Auto
Source].
Press ▲▼ to select [Input]. 1)
Press ►, < 2)
Input/Enter
> or <
Enter
> to display
the setting dialog box.
The [Input] menu dialog box is displayed.
y
Press ▲▼ to select the input you want to 3)
search and press ►.
The input with a check mark will be able to be
y
searched when [Auto Source] is set to [On].
To remove the check mark, choose the desired
y
item and press ►, <Input/Enter> or < Enter >.
Auto Power Off (Min)
Set the time to automatically turn off the projector when
there is no signal input.
Press ▲▼ to select [Auto Power Off (Min)]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the adjustment dialog box.
Press ◄► to adjust off timer (min). 3)
When set to [0 (min)], this function is disable.
y
You can set the time in 5 minutes intervals and the
y
longest set time is 120 minutes.
Note
60 seconds before the auto power off, the count -
y
down screen will appear. The countdown screen will
disappear if there is signal input or operation to the
projector.
Lamp Settings
Displays and sets detail of the lamp settings.
Press ▲▼ to select [Lamp Settings]. 1)
Press ►, < 2)
Input/Enter
> or <
Enter
> to display
the setting dialog box.
Lamp Hours Used (Normal)
„
Displays the used lamp hours under [Normal]
y
lamp power mode.
Lamp Hours Used (ECO)
„
Displays the used lamp hours (in real time) under
y
[Auto] / [ECO1]([ECO]) / [ECO2] lamp power
mode. The time is displayed as the sum of the
time under each setting of [Auto], [ECO1]([ECO])
and [ECO2] lamp power mode.
Lamp Life Reminder
„
Press ▲▼ to select [Lamp Life Reminder]. 1)
Press ►, < 2) Input/Enter > or < Enter > to display
the setting dialog box.
Press ◄► to switch [On]/[Off]. 3)