68
English
LAN Control
-Select the desired projector and click [
Register
] button.
Password authorization is required if password of the projector
is set to enable.
-Click [
OK
] button to return to the original screen.
2. Directly specifies the IP address and registers the projector.
-Enter IP address of the desired projector and click [Confirm]
button then the projector name will be displayed. After
confirming the projector name, click [Register] button.
Control the projector with the projector Management
Utility
Click [
Remote Control
] tab and select the desired projector in
the list. You can control the selected projector by clicking control
buttons in the bottom of the window.
Summary of Contents for PJ HD5450
Page 2: ......
