6
Se
tting
108
If the monitor display is difficult to see
when you take pictures outdoors or in
other situations, adjust the brightness
of the monitor in [Outdoor View
Setting] of the
D
2 menu.
t
Memo
• When [Outdoor View Setting] is assigned to the function dial,
you can change the setting using the Smart Function. (p.21,
p.105) By default, [Outdoor View Setting] is assigned to C3.
You can set whether to light up each
indicator lamp in [Indicator Lamps] of
the
D
2 menu.
Four factory preset settings—HDR LANDSCAPE, MACRO,
ASTROPHOTO, and MANUAL LENS—are assigned to
O
to
4
of the mode dial.
You can save frequently used camera settings to
O
to
5
by
replacing the preset settings with them.
The following settings can be saved.
1
Set the exposure mode and all the necessary
settings to save.
2
Select [Save USER Mode] in the
A
5 menu and
press
D
.
The [Save USER Mode] screen appears.
3
Select [Save Settings] and
press
D
.
The [Save Settings] screen
appears.
4
Select a USER mode from [USER1] to [USER5],
and press
D
.
5
Select [Save] and press
E
.
6
Press
F
.
The screen of Step 3 reappears.
u
Caution
• [Save USER Mode] cannot be selected when the mode dial
is set to
R
or in
C
mode.
Adjusting the Brightness of the Monitor for
Outdoor Shooting
Setting the Lighting-up of the Indicator Lamps
2
Outdoor View Setting
Outdoor View Setting
Night Vision LCD Display
Night Vision LCD Display
Indicator Lamps
Indicator Lamps
LCD Display Settings
LCD Display Settings
Exit
Exit
Indicator Lamps
Indicator Lamps
Self-timer
Self-timer
GPS LED Indicators
GPS LED Indicators
Saving Frequently Used Settings
A
5
Exposure Mode
Sensitivity
EV Compensation
Flash Mode
Drive Mode
White Balance
A
menu and
E
menu
settings (with exceptions)
Saving the Settings
Save USER Mode
Save USER Mode
Rename USER Mode
Rename USER Mode
Check Saved Settings
Check Saved Settings
Reset USER Mode
Reset USER Mode
Save Settings
Save Settings
Summary of Contents for pentax KP
Page 4: ...2 Memo ...
