34
4
Press
0
fully.
Movie recording starts.
In the upper left area of the monitor, “REC” blinks.
5
Press
0
fully again.
Movie recording stops.
6
Return the main switch to the [ON] position to exit
C
mode.
The camera returns to shooting with the viewfinder
in
A
mode.
1
Press
C
in standby mode.
2
Select a flash mode.
Setting the Flash Mode
A
Auto Flash
Discharge
Automatically measures the ambient light and
determines whether to use the flash.
B
Auto Flash
+ Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before an automatic flash.
C
Flash On
Discharges a flash for each picture.
D
Flash On
+ Red-eye
Reduction
Discharges a pre-flash for red-eye reduction
before the main flash and discharges a flash
for each picture.
E
Slow-speed
Sync
Sets to a slow shutter speed and discharges
a flash for each picture.
Use this, for example, when shooting a portrait
with the sunset in the background.
F
Slow-speed
Sync+Red-
eye
Discharges a pre-flash for red-eye reduction
before the main flash is discharged with Slow-
speed Sync.
H
G
Trailing
Curtain Sync
Discharges a flash immediately before closing
the shutter.
Sets to a slow shutter speed.
Captures moving objects as if they are leaving
a light trail behind them.
K
Manual Flash
Discharge
Sets the amount of flash discharge between
FULL and 1/128 power.
0.0EV
0.0EV
±0EV
±0EV
Auto Flash Discharge
Auto Flash Discharge
Cancel
Cancel
OK
OK
e_kb551_sg.book Page 34 Thursday, February 12, 2015 6:11 PM
