3
54
Shooting
• The Shake Reduction function is automatically turned off
when Self-timer or Remote Control is selected.
• When the drive mode that employs the self-timer or remote
control is selected, exposure may be affected by the light
entering through the viewfinder. In such a case, use the
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
Z
and press
B
.
3
Select
Z
or
b
and press
E
.
The camera returns to standby mode.
t
Memo
• In
x
mode, the focus position is locked in the first frame.
1
Press
D
in standby mode.
The Drive Mode screen appears.
2
Select
O
and press
B
.
3
Select
O
or
P
and press
E
.
The camera returns to standby mode.
4
Press
0
halfway, then fully.
The grip lamps blink.
When the remaining time for the timer becomes 5 seconds
or less, the number of blinking grip lamps changes in order
from 5 to 0, according to the number of seconds remaining.
The shutter will be released about 12 seconds or
2 seconds.
Continuous Shooting
Continuous Shooting (H)
Continuous Shooting (H)
Cancel
Cancel
OK
OK
Self-timer
Self-timer (12 sec.)
Self-timer (12 sec.)
Cancel
Cancel
OK
OK
e_kb558_om.book Page 54 Tuesday, September 16, 2014 11:59 AM
