3
52
Shooting
The control panel reappears.
4
Press
F
.
The camera returns to standby mode.
If you selected
g
or
h
in Step 3, proceed to Step 5.
5
Press and hold
E
.
6
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
7
Press
E
.
The AF area is set.
u
Caution
• When
f
is selected, the focus lock operation (composition
adjustment with the half press of
0
) does not work.
t
Memo
• When set to
j
, the number of faces detected can be
confirmed by the number of lit grip lamps (0 to 5).
• To change the setting from the menu, set in [Contrast AF]
of [Live View] in the
A
3 menu.
• When [Focus Peaking] is set to [On] in the control panel or
[Live View] of the
A
3 menu, the outline of the subject in
focus is emphasized and makes it easier to check the focus.
This function works in both
v
and
w
modes.
h
Select
Sets the focusing area by the pixel.
i
Spot
Sets the focusing area to a limited area
at the center.
ABCD
Changes the position of the AF area.
V
Increases/reduces the size of the AF
area (when
g
is selected).
M
Returns the AF area to the center.
OK
OK
e_kb558_om.book Page 52 Tuesday, September 16, 2014 11:59 AM
