Ricoh Pentax K-S1, Operation Manual

Page: 27 / 122

1
25
Introduction
Custom Setting Menus
Menu Item Function Default Setting Page
E
1
1 EV Steps Sets the adjustment steps for exposure. 1/3 EV Steps p.43
2 Sensitivity Steps Sets the adjustment steps for ISO sensitivity. 1 EV Step p.46
3 Meter Operating Time Sets the meter operating time. 10sec. –
4 AE-L with AF Locked
Sets whether to lock the exposure value when the focus
is locked.
Off –
5 Link AE and AF Point
Sets whether to link the exposure and AF point
in the focusing area.
Off p.47
6 Auto EV Compensation
Sets whether to automatically compensate when the proper
exposure cannot be determined.
Off –
7 Bulb (B) Mode Options
Sets the camera operation when pressing 0
in
M
mode.
Type1 –
E
2
8 Bracketing Order Sets the order for Exposure Bracketing shooting. 0 - + p.55
9 One-Push Bracketing
Sets whether to shoot all frames with one release when
using Exposure Bracketing.
Off p.55
10 WB Adjustable Range
Sets whether to automatically fine-tune the white balance
when the light source is specified for the white balance
setting.
Fixed p.56
11 WB When Using Flash Sets the white balance setting for when using a flash.
Auto White
Balance
p.56
12 AWB in Tungsten Light
Sets the tungsten light color tone for when the white balance
is set to [Auto White Balance].
Strong
Correction
p.56
13 Color Temperature Steps Sets the adjustment steps for color temperature. Kelvin p.58
14 Superimpose AF Area
Sets whether to display the active AF point in red
in the viewfinder.
On p.16
e_kb558_om.book Page 25 Tuesday, September 16, 2014 11:59 AM