7
Appen
d
ix
120
*1
Only the
R
mode is available for the capture mode.
*2
Available only when using a D FA, DA, DA L, FA, FA J, F, or A lens.
(When using a lens with an aperture ring, set the aperture ring to the
9
position.)
*3
AF assist light is not available with the AF540FGZ or AF360FGZ.
*4
Shutter speed of 1/100 seconds or slower.
*5
Not available with the AF200FG or AF160FC.
*6
Multiple AF540FGZ, AF540FGZ II, AF360FGZ, or AF360FGZ II units
are required.
*7
Available only when combined with the AF540FGZ, AF540FGZ II,
AF360FGZ, or AF360FGZ II.
u
Caution
• Flashes with the reversed polarity (the center contact on the
hot shoe is minus) cannot be used due to the risk of damaging
the camera and flash.
• Do not combine with accessories that have a different
number of contacts, such as Hot Shoe Grip, as a malfunction
may occur.
• Combining with flashes from other manufacturers may cause
equipment breakdown.
t
Memo
• With the AF540FGZ, AF540FGZ II, AF360FGZ, or
AF360FGZ II, you can use the high-speed sync flash to
discharge a flash and take an image at a shutter speed faster
than 1/200 seconds. Set the exposure mode to
I
,
K
, or
L
.
• By using two or more external flashes (AF540FGZ,
AF540FGZ II, AF360FGZ, or AF360FGZ II), you can use the
wireless mode to shoot in the P-TTL flash mode without
connecting the flash units with a cord. In this case, set the
camera channel on the external flashes.
• You can set the flash sync speed in [X Mode Sync Speed] of
the
E
5 menu.
• You can connect an external flash
to the camera with a sync cord by
using the X-sync socket. Remove
the sync socket 2P cap to connect
a sync cord to the X-sync socket.
Summary of Contents for Pentax K-3 III
Page 145: ...Memo ...
Page 146: ...Memo ...