Ricoh Pentax K-3 II, Operating Manual

Page: 39 / 120

3
Shoo
ting
37
Set the recording method for when two memory cards are
inserted in [Memory Card Options] of the
A 1 menu or the
control panel.
t Memo
• When in C mode, data is saved to the card in either the SD1
or the SD2 slot. Set in [Memory Card Options] of the
C
1
menu.
Set the file format for still pictures in [Image Capture Settings] of
the
A 1 menu or the control panel.
u Caution
• When [Memory Card Options] is set to [Separate RAW/
JPEG], [File Format] is fixed to [RAW+].
t Memo
• When [File Format] is set to [RAW+], a JPEG image and a
RAW image with the same file number are saved at the same
time.
• You can take pictures with a different file format setting only
when P is pressed. (p.79)
• [PEF] of [RAW File Format] is a PENTAX original RAW file
format.
Set the file format for movies in [Movie Capture Settings] of the
C 1 menu or the control panel.
Configuring the Capture Settings
Memory Card Settings
A 1/ v
W
Sequential
Use
When the memory card in the SD1 slot
becomes full, data is saved to the card in
the SD2 slot.
Y
Save to
Both Saves the same data to the memory cards
in both the SD1 and the SD2 slots.
Z
Separate
RAW/JPEG
Saves the RAW data to the memory card in
the SD1 slot, and the JPEG data to the
card in the SD2 slot.
Image Capture Settings
A 1/ v
File Format JPEG, RAW, RAW+
JPEG Recorded Pixels q , p , o , r
JPEG Quality
m
,
l
,
k
RAW File Format PEF, DNG
Movie Capture Settings
C 1/ v
Recorded Pixels Framerate
u 60i, 50i, 30p, 25p, 24p
t
60p, 50p, 30p, 25p, 24p