Ricoh Pentax K-3 II, Operating Manual

Page: 38 / 120

2
G
etting Started
36
Review the captured image on the monitor.
1
Press
3
.
The camera enters playback
mode and the most recently
captured image is displayed
(single image display).
2
Review the captured image.
Available operations
t Memo
• When
R
is turned to the right to magnify the image, the
magnification is displayed at the bottom right of the screen.
z
appears when the image is displayed at the actual pixel
size (1× image display). You can set the initial magnification
when magnifying images in [Quick Zoom] of the
B
1 menu.
• When H v is displayed on the monitor, the JPEG
image that was just taken can also be saved in RAW format
(Save RAW Data).
Reviewing Images
C
/
Q
to the left Displays the previous image.
D
/
Q
to the right Displays the next image.
L
Deletes the image.
R
to the right Magnifies the image (up to
16×).
Use
ABCD
to change the
area to display.
Press
M
to return the display
area to the center.
Press
E
to return to the entire
image display.
R to the left Switches to the thumbnail
display (p.67).
d
Switches between the SD1
card and the SD2 card.
1/ 2000 1/ 2000 F2.8 F2.8 200 200 0.0 0.0
100-0001 100-0001
H Saves the RAW data (only
when a JPEG image was taken
and the data remains in the
buffer).
G
Changes the type of
information displayed (p.14).
B
Displays the playback mode
palette (p.66).