2
G
etting Started
30
We recommend the use of the optional AC adapter kit K-AC132
when using the monitor for a long time or when connecting the
camera to a computer or AV device.
1
Make sure that the camera
is turned off, and open the
terminal cover.
2
Align the
A
marks on the
DC terminal of the AC
adapter and DC input
terminal of the camera, and
connect.
3
Connect the AC adapter to the AC plug cord, and
plug the cord into the power outlet.
u
Caution
• Make sure that the camera is turned off before connecting or
disconnecting the AC adapter.
• Make sure that connections are secure between the
terminals. The memory card or data may be corrupted if the
connection to the power supply is lost while the card is being
accessed.
• Be sure to read the manual of the AC adapter kit before using
the AC adapter.
The following memory cards can be used with this camera.
• SD Memory Card, SDHC Memory Card, and SDXC Memory
Card
• Eye-Fi card
• Flucard compatible with this camera
In this manual, these cards are referred to as memory cards.
1
Make sure that the camera is turned off.
2
Slide the memory card
cover in the direction of
1
and then rotate it to open
as shown by
2
.
3
Insert the card all the way
into the memory card slot
with the memory card label
facing toward the side with
the monitor.
To use an Eye-Fi card or a
Flucard, insert the card in the
SD2 slot.
Push the memory card in once
and release to remove.
Using the AC Adapter
Inserting a Memory Card
2
1
Summary of Contents for Pentax K-3 II
Page 117: ...Memo ...
Page 118: ...Memo ...
