Ricoh Pentax 645Z, Operating Manual

Page: 99 / 172

97
6
The memory card is full and no more
images can be saved. Insert a new
memory card or delete unwanted files.
There are no images that can be
played back on the memory card.
You are trying to play back an image in
a format not supported by this camera.
You may be able to play it back on
a computer.
There is no memory card inserted
in the camera.
The memory card has a problem,
and image capture and playback are
impossible. You may be able to play
it back on a computer.
Or, the camera failed to initialize the
Eye-Fi function when using the Eye-Fi
card. Press E .
The memory card you have inserted is
unformatted or has been previously
used on another device and is not
compatible with this camera.
Use the card after formatting
it with this camera. (p.36)
The write-protect switch on the
memory card you have inserted
is locked. (p.4)
You are trying to magnify an image
that cannot be magnified.
You are trying to delete an image that
is protected. Remove protection from
the image. (p.83)
These messages appear when you try
to perform Pixel Mapping or Sensor
Cleaning, or to update the firmware
if the battery level is insufficient.
Install a fully charged battery.
Unable to update the firmware.
The update file is damaged.
Try downloading the update file again.
The maximum folder number (999)
is being used, and no more images
can be saved. Insert a new memory
card or format the card.
The image could not be saved
because of a memory card error.
The camera was unable to adjust
the manual white balance.
Try the operation again.
You are trying to select more than the
maximum number of images for Select
& Delete, Protect, RAW Development,
Image Copy, or Eye-Fi Image
Transfer.
There are no images that can be
processed using the Digital Filter
or RAW Development function.