Ricoh Pentax 645Z, Operating Manual

Page: 58 / 172

56
3
You can choose from the following drive modes.
Only
4
(Remote Control Off),
Q
or
Y
can be selected in
C
mode.
The Drive Mode setting is saved even after the power is turned off.
If [Drive Mode] is set to off in [Memory] of the
A
4 menu, the setting
returns to Single Frame Shooting when the power is turned off.
(
w
p.R22)
When the drive mode that employs the self-timer or remote control
is selected, exposure may be affected by the light entering through
the viewfinder. In such a case, use the AE Lock function. (p.50)
There are restrictions on some drive modes when used in
combination with some other functions. (
w
p.R44)
1 A
The Drive Mode setting screen
appears.
2
Z
B .
3
Z b
E .
The camera returns to standby mode.
When the AF mode is set to x , the focus position is locked
in the first frame.
The framerate may slow down when the sensitivity is high.
(
L
)
Normal capture mode
(
Z
/
b
)
Continuously takes pictures while the shutter
release button is kept pressed.
The number of pictures that can be taken
continuously varies according to the shutter speed.
(
O
/
P
)
Releases the shutter about 12 seconds or 2
seconds after the shutter release button is pressed.
(
Q
/
R
/
S
)
Enables shooting with remote control.
Select from [Remote Control], [Remote Control
(3 sec. delay)] or [Remote Continuous Shooting].
(
V
/
2
/
W
/
X
)
Creates a composite picture by taking multiple
images and merging them into a single image.
Select from [Multi-exposure], [Multi-exposure
+Continuous], [Self-timer+Multi-exposure] or
[Remote Multi-exposure].
(
Y
)
Takes pictures at a set interval from a set time.
(
3
)
Takes still images at a set interval and merges
them into a single image.
Star and moon trails can be captured in one image.
(
Y
)
Takes still images at a set interval from a set time
and saves them as a single movie file.
Available only in
C
mode.
W
Continuous Shooting (H) Continuous Shooting (H)
Cancel Cancel OK OK