Ricoh Pentax 645Z, Operating Manual

Page: 48 / 172

46
3
You can select an autofocus mode when shooting with Live View.
1 R 6 .
The screen for selecting an autofocus
mode appears.
Proceed to Step 2 if
g
or
h
is selected.
2 c .
The screen to set the AF area is displayed.
3
Use the frame that appears on the
monitor to change the position and size
of the AF area.
4 E .
The AF area is set.
When
f
is selected, the focus lock operation (composition
adjustment with the half press of the shutter release button)
does not work.
You can also select an autofocus mode for Live View in [Contrast
AF] of [Live View] in the
A
3 menu or [Contrast AF] in the control
panel. (
w
p.R18)
When [Focus Peaking] of [Live View] in the
A
3 menu or [Focus
Peaking] in the control panel is set to on, the outline of the subject
in focus is emphasized and makes it easier to check the focus.
(
w
p.R18)
e
Detects and tracks faces of people. (Default setting)
The main face detection frame for AF and AE is
displayed in yellow.
f
Tracks the subject in focus.
The shutter can be released even if the subject is not
in focus.
g
Sets the focusing area to the desired area.
The sensor is divided into 35 areas (7 horizontal
by 5 vertical), and you can select a wider or narrower
focusing area by using 1, 9, 15, or 21 of those
35 available areas.
h
Sets the focusing area by the number of pixels.
i
Sets the focusing area to a limited area at the center.
Face Detection Face Detection
1/ 2000 1/ 2000 F2.8 F2.8 1600 1600 1234 1234
ABCD
Changes the position of the AF area.
R
Increases/reduces the size of the AF area
(when
g
is selected).
M
Returns the AF area to the center.
OK OK