Ricoh Pentax 645Z, Operating Manual

Page: 155 / 172

R41
E
Selects the 1st frame action priority for when the focus mode is
set to y and the shutter release button is fully pressed.
Selects the action priority during Continuous Shooting for when
the focus mode is set to y .
Sets whether to maintain the focus for a certain amount of time
when the subject happens to move out of the selected focusing
area after being focused. Selects [Off], [Low], [Medium], or
[High].
Enables autofocus with remote control.
Sets the color space of image files to [sRGB] or [AdobeRGB].
Image file names vary depending on the color space setting.
(p.R32)
Sets the LCD panel backlight setting to [Low] or [High].
Saves the rotation information of an image according to the
orientation of the camera when the image was shot.
The last menu tab displayed on the monitor is saved, and it is
displayed again the next time F is pressed.
E
3
Starts shooting immediately, even if the subject is not in
focus.
Determines whether focus adjustment is necessary
depending on the focusing conditions.
Starts shooting when the subject is in focus.
E
3
Prioritizes tracking the subject.
Determines which to prioritize, focus or framerate.
Prioritizes the speed of Continuous Shooting.
E
3
E
3
E
3
sRGB IMGPxxxx.JPG
AdobeRGB _IMGxxxx.JPG
E
3
E
4
E
4