Ricoh Pentax 645Z, Operating Manual

Page: 145 / 172

R31
D
When images are captured with this camera, a folder is
automatically created and the captured images are stored in it.
Each folder name consists of a sequential number from 100
to 999 and a string of 5 characters.
The character string for the folder name can be changed.
1
D
D .
The [Folder Name] screen appears.
2
E .
Proceed to Step 5 if you do not need to change the folder name.
3 B D .
The text-entry screen appears.
4
Enter 5 single-byte alphanumeric
characters.
5
E .
6 F
A folder with a new number is created when the folder name
is changed.
A maximum of 500 images (100 images for Eye-Fi card) can be
stored in a single folder. When the number of captured images
exceeds 500, a new folder is created with the number following the
number of the folder currently being used. In Exposure Bracketing
shooting, images will be stored in the same folder until shooting
is completed.
When [Select multiple images] or [Select a folder] of [RAW
Development] is selected, a folder with a new number is created,
and the JPEG images are stored in it.
D
2
The two digits of the month and day on which the picture was
taken are assigned after the folder number.
[MMDD] appears according to the date format set in [Date
Adjustment].
Example) 101_0125: for images taken on January 25th
The character string PENTX is assigned after the folder
number.
Example) 101PENTX
Cancel Cancel OK OK
Folder Name Folder Name Date Date
PENTX PENTX
_ M M D D _ M M D D
Folder Name Folder Name
ABCD
Moves the text selection cursor.
R
Moves the text input cursor.
E
Enters a character selected with the text selection
cursor at the position of the text input cursor.
M
Resets the adjustment value to the default setting.
Cancel Cancel
Reset Reset
Enter Enter
Finish Finish
Folder Name Folder Name
Text input cursor
Text selection cursor