manualshive.com logo in svg

Ricoh P C311W, User Manual, Page: 72 / 224

Share
Download
Ricoh P C311W User Manual Download Page 72

Menu Chart

This section lists the parameters included in each menu.
For details about configuring the machine using Web Image Monitor, see page 92 "Using Web
Image Monitor".

• Some items might not appear depending on the model type or machine's configuration.
• Some items can also be configured using Web Image Monitor.

Admin. Tools

For details, see page 71 "Admin. Tools".

Printer Settings

For details, see page 73 "Printer Settings".

System Settings

For details, see page 77 "System Settings".

Tray Paper Settings

For details, see page 81 "Tray Paper Settings".

Wi-Fi Setup Wizard

For details, see Setup Guide.

Network Settings

For details, see page 84 "Network Settings".

Print List/Report

For details, see page 88 "Print List/Report".

@Remote

For details, see page 89 "@Remote".

4. Configuring the Machine Using the Control Panel

70

Summary of Contents for P C311W

































































































































































































































Reviews:

No comments