manualshive.com logo in svg

Ricoh P C311W, User Manual, Page: 157 / 224

Share
Download
Ricoh P C311W User Manual Download Page 157

3.

Standing at the front and back of the machine, two persons should lift the machine using
the inset grips on the sides. Move it horizontally to the place where you want to use it.

DUD470

4.

If you have removed Tray 2, reinstall it.

• To move the machine over a long distance, pack it well and empty all the paper trays. Take care

not to tip or tilt the machine during transit.

• Toner might spill inside the machine if the machine is not kept level during transit.
• For more information about moving the machine, contact your sales or service representative.

Disposal

Ask your sales or service representative for information about correct disposal of this machine.

Where to Inquire

Contact your sales or service representative for further information about the topics included in this
manual or to inquire about other topics not included in this manual.

Moving and Transporting the Machine

155

Summary of Contents for P C311W

































































































































































































































Reviews:

No comments