Ricoh P C311W, User Manual, Page: 110 / 224

Configuring the Network Settings
Click [Network Settings] to display the page for configuring the network settings.
This page contains the following tabs: [Network Status], [TLS Security], [IPv6 Configuration], [Network
Application], [DNS], [Auto E-mail Notification], [SNMPv1/v2], [SNMPv3], [SMTP], [POP3],
[Wireless], and [Certificate].
• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.
Network Status Tab
General Status
Item Description
Ethernet Speed Shows the type and speed of the network connection.
IPP Printer Name Shows the name used to identify the machine on the network.
Network Version Shows the version of the machine's network module (a part of the machine
firmware).
Ethernet MAC Address Shows the Ethernet MAC address of the machine.
Active Interface Shows the active communication method.
Wi-Fi Direct IP Address Shows the IP address of Wi-Fi Direct.
TCP/IP Status
Item Description
DHCP Select whether the machine should receive a dynamic IPv4 address
automatically using DHCP. To use DHCP, select [Active]. When enabled,
the items below cannot be configured.
IP Address Enter the IPv4 address for the machine.
It is not possible to enter 0.0.0.0 or 255.255.255.255.
Subnet Mask Enter the subnet mask of the network.
It is not possible to enter 0.0.0.0 or 255.255.255.255.
5. Configuring the Machine Using Utilities
108