Home
/
Ricoh
/
P C300W
/
User Manual

Ricoh P C300W, User Manual, Page: 132 / 220

Share

Page: 132 / 220

Ricoh P C300W User Manual Download Page 132

Replacing the Waste Toner Bottle

Messages on the screen

• Replace the waste toner bottle when the following message appears on the screen:

"Replacement Required: Waste Toner Bottle"

• Prepare a waste toner bottle when the following message appears on the screen:

"Replace Required Soon: Waste Toner Bottle"

• Waste toner bottles cannot be reused.
• When removing the waste toner bottle, make sure not to tilt it.
• Make sure the transfer unit is installed. If the transfer unit is not installed, install it before turning on

the power.

• Before removing the waste toner bottle from the machine, spread paper or similar material around

the area to keep toner from dirtying your workspace.

1.

Pull the front cover open lever and then carefully lower the front cover.

ECB108

2

1

2.

Slide the lever in front of the transfer unit forward.

ECC135

6. Maintaining the Machine

130

«
...
130
131
132
133
134
...
»

Summary of Contents for P C300W





























































































































































































































Reviews:

No comments