Ricoh P C200W User Manual Download Page 12

Page: 12 / 152

Learn about the printer

Using the control panel

Panel with 2-line LCD

Control panel part

Function

Display

•

View printer messages and supply status.

•

Set up and operate the printer.

Right arrow button

•

Scroll through menus or move between screens and menu options.

•

Increase the numeric value of a setting.

Stop or Cancel button

Stop the current job.

Indicator light

Check the status of the printer.

Select button

•

Select a menu option.

•

Save the changes in a setting.

Back button

Return to the previous screen.

Left arrow button

•

Scroll through menus or move between screens and menu options.

•

Decrease the numeric value of a setting.

Power button

Turn on or turn off the printer.

Note:

To turn off the printer, press and hold the power button for five seconds.

Summary of Contents for P C200W

























































































































































Search results

Summary of Contents for P C200W

Reviews:

Related manuals for P C200W

Brands by name

Popular brands

Ricoh P C200W, User Manual

Search results

Summary of Contents for P C200W

Reviews:

Related manuals for P C200W

Brands by name

Popular brands