Ricoh Neptune-P1, Service Manual

Page: 214 / 457

Code Location Code Location
C Fusing Unit (Exit) V1 Manual feeder feed entrance
N1 Folder unit entrance (from main unit)
• The operator must open and close the upper unit to release a jam in the fusing unit.
• If the operator opens and closes the paper exit cover during copying, this is not recorded in the jam
record.
• A paper feed jam that occurs just after the main power switch or operation switch comes on is not
recorded in the jam record.
Printer Jams
Plotter Standby Jams
Code Location Display Comment
001 Initial Jam: Registration Sensor B
Initial Jam: Paper Set Sensor B
Initial Jam: Fusing Exit Sensor C
Plotter Late Jams
Code Location Display Comment
003 Roll 1 Non-Feed Jam A2
004 Roll 2 Non-Feed Jam A2
005 Paper cassette Non-Feed Jam A1
008 Roll Feeder Exit Jam A2 RF exit sensor not ON
013 Registration Jam B Registration sensor not ON
016 Fusing Exit Jam C Fusing exit sensor not ON.
034 Bypass Non-Feed B Paper set not ON.
Jam Code Tables
213
4