Ricoh MP7080A, User Manual

Page: 14 / 37

4.
Busy indicator
This indicator lights orange when a disc is mounted into the drive. When the disc is being accessed, it flashes or
lights orange. If a disc is not mounted, the indicator does not light even when the power is turned on. When a
illegal disc is loaded or some hardware trouble occurs, the indicator blinks.
5.
Eject button
This is the button used to eject or insert in the disc tray.
6.
Emergency eject hole
This drive has a function that allows the disc to be ejected manually if this becomes necessary in an emergency
such as failure of the drive or a power outage.
Caution
This feature is a last measure to be used only in an emergency. Using it excessively will cause
malfunction.
Rear panel
1.
Digital Audio Output Connector
Provides output to a sound card (Digital signal).
2.
Analog Audio Output Connector
Provides output to a sound card (Analog signal).
3.
Jumper Connector
This jumper determines whether the drive is configured as a master or slave. Changing the master-slave
configuration takes effect after power-on reset.
4.
IDE Interface Connector