GB
STEP
3
:
HOW TO USE THE DRIVE
The basic procedures for using the drive are listed below. Load the disc
1. Press the eject button.
2. Place the disc on the disc tray
3. Load the disc by pressing the eject button or by lightly pushing in the disc tray.
After ejecting the disc, load the tray inside the unit quickly. When the tray is in the ejected
position, dust and other debris will enter, possibly causing read and write errors, or drive
failure.
Emergency Eject
In some unusual situations where the drive becomes faulty or there is a power outage, you
can manually remove a CD from the drive using the following method.
- Never use this method to remove CD's from the drive except for emergency purposes.
- The manual method mentioned here is used only for emergency purposes.
Using the manual method for any other purpose may result in malfunctioning of the drive.
1. Turn of the power.
2. Push a thin, long object into the emergency eject space.
The disc tray pops out slightly.
3. Slowly and gently pull out the disc tray.
http://www.ricohpmmc.com
manual ricoh PDF handbuch.qxd 25.02.2004 18:28 Uhr Seite 7
