manualshive.com logo in svg

Ricoh MP CW2201sp, User Manual

Share
Download
Ricoh MP CW2201sp User Manual Download Page 181

Replacing an Ink Collector Unit

• The following explains the warning messages on the plastic bag used in this product's

packaging.

• Keep the polythene materials (bags, etc.) supplied with this machine away from babies

and small children at all times. Suffocation can result if polythene materials are brought into
contact with the mouth or nose.

• Keep ink and ink containers out of reach of children.

• When replacing ink collector unit, avoid getting ink on your clothing. If ink comes into contact

with your clothing, wash the stained area with cold water. Hot water will set the ink into the
fabric and make removing the stain impossible.

• If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if

necessary.

• If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor

immediately.

• When removing jammed paper or replacing ink, avoid getting ink on your skin. If ink comes into

contact with your skin, wash the affected area thoroughly with soap and water.

• When removing the ink collector unit, do not touch the inside of the machine.
• Store the unused ink collector in the plastic bag.
• Do not touch the ink collector unit's chip contacts.
• Do not drop or tilt the ink collector unit. Doing so may result in leakage.
• Take care not to drop the ink collector unit when putting it in the supplied plastic bag. The bag

might tear, causing ink to spill.

• Push in the ink collector unit until the lever clicks. If it does not click into place, ink may leak inside

the machine.

Replacing an Ink Collector Unit

179

Summary of Contents for MP CW2201sp

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands