manualshive.com logo in svg

Ricoh MP 6503, User Manual

Share
Download
Ricoh MP 6503 User Manual Download Page 29

2. Getting Started

This chapter describes how to start using this machine.

Guide to Names and Functions of Components

• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal

components.

Front and left view

DQA001

1

2

3

4

5

6

7

8

1. ADF

Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

Place originals face down here. For details, see page 60 "Placing Originals on the Exposure Glass".

3. Copy tray

Copied/printed paper and fax messages are delivered here.

4. Human detection sensor

The human detection sensor is on the left side of the machine. For details, see "Human Detection Sensor",
Getting Started.

27

Summary of Contents for MP 6503





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands