Ricoh MP 2001L, Operating Instructions Manual, Page: 57 / 120

3. Enter the ratio.
To select the ratio using the scroll keys
1. Adjust the ratio using the [ ] or [ ] key.
• If you have incorrectly entered the ratio, readjust using the [ ] or [ ] key.
• To change the ratio in increments of 10%, press and hold down the [ ] or [ ] key.
2. Press the [OK] key.
The "Programmed" message appears.
To enter the ratio using the number keys
1. Enter the desired ratio using the number keys.
2. Press the [OK] key.
The "Programmed" message appears.
4. Place your originals, and then press the [Start] key.
Auto Reduce/Enlarge
You can choose an appropriate reproduction ratio based on the paper and original sizes you select.
• You cannot use the bypass tray with this function.
• See the following table for original sizes and orientations you can use:
Copier Functions
55