Ricoh MP 2001L, Operating Instructions Manual, Page: 41 / 120

3. Select [Regular Size] using the [ ] or [ ] key, and then press the [OK] key.
• When [Auto Detect] is selected, the size of the placed original will be detected automatically.
4. Select the original size using the scroll keys, and then press the [OK] key.
The "Programmed" message appears.
When the regular size originals settings are registered,
appears on the top of copy
display.
• To cancel the size you have set, press the [Reset] key.
Placing custom size originals
When placing custom size originals on the exposure glass or in the ADF, specify the size of the originals
using the number keys.
• Originals that have a vertical length of 105–297 mm (4.2"–11.6") and a horizontal length of
128–1,260 mm (5.1"–49.6") can be specified.
Placing Originals
39