Operating Instructions
Administrator Reference
55
Configuring a Windows NT computer
Install the NetBEUI protocol on the Windows NT computer, and change the LAN adapter number (La-
na Number).
AAAA
Open
[
Control Panel
]
and double-click the
[
Network
]
icon. Confirm that "NetBEUI Protocol" is
listed in the
[
Network Protocols
]
box under the
[
Protocols
]
tab.
Note
❒
If the NetBEUI protocol is not installed, click [
Add...
] under the [
Protocols
] tab, and install it. For
more information about installing the NetBEUI protocol, see Windows NT Help.
BBBB
Change the Lana Number. Click the
[
Services
]
tab, click "NetBIOS Interface" in the
[
Network
Services:
]
box , and then click
[
Properties:
]
.
CCCC
Click the Lana Number corresponding the Nbf protocol of the
[
Network Route
]
headline, and
then click
[
Edit
]
.
DDDD
Type "0" as the Lana Number.
Note
❒
If another protocol’s Lana Number is configured at “0”, change it to another number other than
“0”.
EEEE
Click
[
OK
]
.
FFFF
Click
[
Close
]
, and then close the
[
Network
]
dialog box.
GGGG
After confirming the message to restart, click
[
Yes
]
.
Note
❒
After you change the Lana Number, you must restart the computer.
