manualshive.com logo in svg

Ricoh Martini-C3.5, Operating Instructions Manual, Page: 56 / 90

Share
Download
Ricoh Martini-C3.5 Operating Instructions Manual Download Page 56

Appendix

42

3

❖

PCL printer drivers

Two kinds of PCL printer driver (PCL 5e and PCL 6) are included on the CD-
ROM that comes with this machine. These drivers allow your computer to
communicate with this machine via a printer language.

❖

RPCS printer driver

This printer driver allows the computer to communicate with the printer us-
ing a printer language. In addition to the conventional user interface, another
preset user interface is provided.

❖

Adobe PostScript Printer Drivers and PPD files

Adobe PostScript printer drivers and the PPD files are included on the CD-
ROM provided with this machine. Adobe PostScript printer drivers allow the
computer to communicate with the printer using a printer language. PPD
files allow the printer driver to enable specific printer functions.

❖

PPD files

PPD files are included on the CD-ROM provided with this machine. PPD files
allow the printer driver to enable specific printer functions.

Note

❒

Some applications may require installation of the PCL 5e printer driver. In
this case, you can install PCL 5e without having to install PCL 6.

Reference

“Preparing the Machine”, Printer Reference
PostScript 3 Supplement

TWAIN Driver

This section describes the file path to and system requirements of the TWAIN driver.
This driver is required to scan an original using a scanner. To use the machine
as a network TWAIN scanner, this driver must be installed.

❖

File path

The following drivers are included on the CD-ROM labeled “Scanner/Post-
Script Drivers and Utilities” provided with this machine:

\DRIVERS\TWAIN

❖

System requirements

• Hardware

PC/AT-compatible machines that support the following operating system
properly

• Operating system

Microsoft Windows 2000/XP/Vista
Microsoft Windows Server 2003/2003 R2

• Display resolution

800 

×

 600 pixels, 256 colours or higher

Summary of Contents for Martini-C3.5



























































































Reviews:

No comments