manualshive.com logo in svg

Ricoh Martini-C3.5, Operating Instructions Manual, Page: 31 / 90

Share
Download
Ricoh Martini-C3.5 Operating Instructions Manual Download Page 31

17

1. Getting Started

This section describes how to start using this machine.

Guide to Components

This section introduces the names and functions of the components.

1.

Auto Document Feeder (ADF)

Load a stack of originals here. They will
be fed automatically one by one.
The front and back side of two-sided
originals are scanned simultaneously.

2.

Exposure glass

Place originals face down here.

3.

Control panel

See “Control Panel”.

4.

Front cover

Open to access the inside of the machine.

5.

Copy tray (optional)

Copied or printed paper is delivered
here.

6.

Main power switch

If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on.

7.

Operation switch

Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).

8.

Paper tray (tray 1-3)

Load paper here.

ANP005S

Summary of Contents for Martini-C3.5



























































































Reviews:

No comments