manualshive.com logo in svg

Ricoh Martini-C3.5, Operating Instructions Manual, Page: 27 / 90

Share
Download
Ricoh Martini-C3.5 Operating Instructions Manual Download Page 27

13

ENERGY STAR Program

❖

ENERGY STAR

®

 Program Requirements for Imaging Equipment

Note

❒

For the default delay time, see “Energy Saving Functions”.

Reference

p.14 “Energy Saving Functions”

This company is a participant in the ENERGY STAR

®

 

Program.

This machine is compliant with the regulations speci-
fied by the ENERGY STAR

®

 Program.

The ENERGY STAR

®

 Program Requirements for Imaging Equipment encourage energy con-

servation by promoting energy efficient computers and other office equipment.

The program backs the development and dissemination of products that feature energy saving 
functions.

It is an open program in which manufacturers participate voluntarily.

Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.

Summary of Contents for Martini-C3.5



























































































Reviews:

No comments