manualshive.com logo in svg

Ricoh Martini-C3.5, Operating Instructions Manual, Page: 11 / 90

Share
Download
Ricoh Martini-C3.5 Operating Instructions Manual Download Page 11

ix

Preventing an Unauthorized Copy

You can embed a pattern in the printed document to prevent it from being copied.

• Using the printer driver, you can embed a pattern in the printed document. If

the document is copied on a machine with the Copy Data Security Unit (op-
tional), protected pages are grayed out in the copy, preventing confidential
information from being copied. In addition, the machine beeps to notify that
unauthorized copying is being attempted.
If the document is copied on a machine without the Copy Data Security Unit,
the hidden text becomes conspicuous in the copy, showing that the copy is
unauthorized.
See the printer driver Help and Printer Reference.

• Using  the  printer  driver,  you can embed text in the printed document for un-

authorized copy prevention. If the document is copied on this or other ma-
chines, the hidden text appears in the copy, discouraging such unauthorized
copying.
For details, see the printer driver Help, Facsimile Reference, Printer Reference
and Security Reference.

ANP001S

Summary of Contents for Martini-C3.5



























































































Reviews:

No comments