Ricoh M C251FW User Manual Download Page 359

Page: 359 / 448

Removing Paper Jams

If a paper jam occurs, one of the following messages appears on the control panel:

• If the alert indicator lights up continuously or flashes, press the [Info] icon on the [Home] screen and

check the displayed message.

Message

Reference title

Internal Misfeed

See page 360 "If paper jams inside the fusing
unit".

Misfeed: Standard Tray

Misfeed: Paper Tray

See page 362 "If paper jams inside a tray".

Misfeed: Tray 1

Misfeed: Tray 2

Misfeed: Duplex Unit
Remove Paper

See page 364 "If paper jams inside the transfer
unit".

ADF Original Misfeed
Open ADF Cover
and remove paper.

See page 365 "Removing Scanning Jams".

See the section identified by the message and remove the jammed paper accordingly.

Removing Printing Jams

• The inside of this machine becomes very hot. Do not touch the parts labeled " " (indicating a

hot surface).

• Some of this machine's internal components get very hot. For this reason, take care when

removing misfed paper. Not doing so could result in burns.

• Some of the internal components of this machine might be fragile. When you remove jammed

paper, do not touch the sensors, connectors, LEDs, or other fragile parts that are shown in this
manual. Doing so may cause malfunctions.

For the location of the sensors in the machine and extended options, see the following illustrations.

Removing Paper Jams

357

Summary of Contents for M C251FW

































































































































































































































































































































































































































































Search results

Summary of Contents for M C251FW

Reviews:

Brands by name

Popular brands

Ricoh M C251FW, User Manual

Search results

Summary of Contents for M C251FW

Reviews:

Brands by name

Popular brands