Ricoh M C240FW, User Manual

Page: 65 / 235

Fax 65
Blocking junk faxes
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax .
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls .
2
Set Block No Name Fax to
On
.
Holding faxes
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax .
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes .
3
Select a mode.
4 Apply the changes.
Forwarding a fax
Note: Make sure that fax is configured. For more information, see Setting up the printer to fax .
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls .
2
Touch
Fax Forwarding
>
Forward
.
3 Configure the Forward to and Confirmation E-mail settings.