Ricoh LP124w, Software Manual

Page: 61 / 376

Installing the Printer Driver Using USB
47
1
H
Check the location, and then click [ Next > ] .
USB Printing Support is installed.
I
Click [ Finish ] .
If the printer driver has already been installed, plug and play is enabled, and
the icon of the printer connected to the “USB001” port is added to the
[ Printers ]
window.
J
Install the printer driver.
K
In the [ Found New Hardware Wizard ] dialog box, click [ Install from a list or specific
location (Advanced) ] , and then click [ Next > ] .
L
Select the [ Specify a location: ] check box, and then click [ Browse... ] .
The [ Browse for Folder ] dialog box appears.
M
Insert the CD-ROM into the CD-ROM drive.
Note
❒
When Auto Run starts, click [ Exit ] .
❒
To disable Auto Run, press the
{
Shift
}
key when inserting the CD-ROM
into the drive and keep it pressed until the computer finishes reading from
the CD-ROM.
N
Specify the location where the source files of the printer driver are stored,
and then click
[ Next > ]
.
If the CD-ROM drive is D, the source files of the printer driver are stored in
the following location:
• RPCS
D:\DRIVERS\RPCS\WIN9X_ME\(Language)DISK1
• PostScript 3
D:\DRIVERS\PS\WIN9X_ME\(Language)DISK1
O
Check the location, and then click [ Next > ] .
Add Printer Wizard starts.
P
Click [ Finish ] .
Installation is complete. If installation is successful, the icon of the printer
connected to the “USB001” port is added to the
[ Printers ] window.
Note
❒
The number after “USB” varies depending on the number of printers con-
nected.
❒
It is not necessary to reinstall USB Printing Support when connecting a dif-
ferent machine via USB interface when USB Printing Support is installed.
❒
After installing USB Printing Support, if the printer driver is not installed,
follow the plug-and-play instructions of the printer.