Ricoh LP124w, Software Manual

Page: 49 / 376

Using the LPR Port
35
1
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003/2003 R2)
Important
❒
Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒
In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice-
Monitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [ OK ] .
The default interface language is English.
D
Click [ PostScript 3 Printer Driver ] .
Add Printer Wizard starts.
E
Click [ Next > ] .
F
Click [ Local Printer attached to this computer ] , and then click [ Next > ] .
G
Click [ Create a new port: ] .
H
Click [ LPR Port ] in [ Create a new Port ] , and then click [ Next > ] .
I
Enter the printer's IP address in the [ Name or address of server providing lpd ]
box.
J
Enter “lp” in the [ Name of printer or print queue on that server ] box, and then click
[ OK ] .
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click
[ Next > ] .
L
Change the printer name if you want, and then click [ Next > ] .
Select the
[ Yes ]
check box to configure the printer as default.
M
Click [ Next > ] .
N
Specify whether or not to print a test page, and then click [ Next > ] .
O
Click [ Finish ] .
The printer driver installation starts.