background image

Copyright Information about Installed Applications

353

11

Copyright Information about Installed 
Applications

expat

Use of the software installed on this product, including the controller (hereinaf-
ter “software”) and the expat Version 1.95.2 application software (hereinafter
“expat 1.95.2”), is subject to the following conditions:
The product manufacturer provides warranty and support to the software of the
product including expat 1.95.2 and the product manufacturer allows the initial
developer of expat 1.95.2 to be free from these obligations.
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd
and Clark Cooper
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the “Software”), to deal in the
Software without restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, sub-
ject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AU-
THORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAG-
ES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFT-
WARE.

Note

Information on expat 1.95.2 is available at:

http://expat.sourceforge.net/

JPEG LIBRARY

The software installed on this product is based in part on the work of the Inde-
pendent JPEG Group.

Summary of Contents for LP124w

























































































































































































































































































































































































Reviews: