Ricoh LP124w Page 34 Software Manual Download

Page: 34 / 376

Preparing for Printing

Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003/2003 R2 - TCP/IP)

Important

❒

Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.

Quit all applications currently running.

Insert the CD-ROM into the CD-ROM drive.

The installer starts.

Select an interface language, and then click

[

]

The default interface language is English.

Click

[

PostScript 3 Printer Driver

]

Add Printer Wizard starts.

Click

[

Next >

]

Click

[

Local printer attached to this computer

]

, and then click

[

Next >

]

Click

[

Create a new port:

]

Click

[

SmartDeviceMonitor

]

, and then click

[

Next >

]

Click

[

TCP/IP

]

, and then click

[

Search

]

A list of printers using

[

TCP/IP

]

appears.

Select the printer you want to use, and then click

[

]

Only printers that respond to a broadcast from the computer appear. To use
a printer not listed here, click

[

Specify Address

]

, and then enter the IPv4 ad-

dress or host name of the printer.

Check that the name of the printer whose driver you want to install is se-
lected, and then click

[

Next >

]

Change the printer name if you want, and then click

[

Next >

]

Select the

[

Yes

]

check box to configure the printer as default.

Summary of Contents for LP124w
























































































































































































































































































































































































Search results

Summary of Contents for LP124w

Reviews:

Related manuals for LP124w

Brands by name

Popular brands

Ricoh LP124w, Software Manual

Search results

Summary of Contents for LP124w

Reviews:

Related manuals for LP124w

Brands by name

Popular brands