Ricoh LP124w, Software Manual

Page: 302 / 376

Using a Printer Server
288
7
Setting Up as a Remote Printer (NetWare 4.x, 5/5.1, 6/6.5)
Follow the procedure below to use the printer as a remote printer under Net-
Ware 4.x, 5/5.1 and 6.
Important
❒
To use the printer as a remote printer under NetWare 4.x/5/5.1, set it to NDS
mode.
❒
Do not use the printer as a remote printer when Pure IP is used.
Setting up using NWadmin
A
From Windows, start NWadmin.
For details about NWadmin, see the NetWare manuals.
B
Set up the network connection to a print queue. Select the object in which
the print queue is located in the directory tree, and then click
[ Create ]
on the
[ Object ] menu.
C
In the
[ Class of new object ]
box, click
[ Print Queue ]
, and then click
[ OK ]
.
D
In the [ Print Queue Name ] box, enter the name of the print queue.
E
In the
[ Print Queue Volume ]
box, click
[ Browse ]
.
F
In the [ Available objects ] box, click the volume in which the print queue is
created, and then click
[ OK ]
.
G
Check the settings, and then click [ Create ] .
H
Set up the network connection to a printer. Select the object in which the
printer is located, and then click
[ Create ] on the [ Object ] menu.
I
In the [ Class of new object ] box, click [ Printer ] , and then click [ OK ] . For Net-
Ware 5, click [ Printer (Non NDPS) ] .
J
In the [ Printer name ] box, enter the printer name.
K
Select the [ Define additional properties ] check box, and then click [ Create ] .
L
Assign print queues to the created printer. Click
[ Assignments ]
, and then
click [ Add ] in the [ Assignments ] area.
M
In the
[ Available objects ]
box, click the queue you created, and then click
[ OK ]
.