Ricoh LP124w, Software Manual

Page: 248 / 376

Monitoring and Configuring the Printer
234
6
pathmtu
Use the “pathmtu” command to display and configure the PathMTU Discovery
service function.
❖
View Setting
msh> pathmtu
❖
Enabling / disabling the PathMTU Discovery service
msh> pathmtu{on|off}
• The default is “on”.
• If the MTU size of the sent data is larger than the router's MTU, the router
will declare it impassable, and communication fails. If this happens, select-
ing the “pathmtu” to “off” optimizes the MTU size and prevents data out-
put failure.
• Depending on the environment, information might not be obtained from
the router, and communication will fail. If this happens, select the “pathm-
tu” to “off”.
prnlog
Use the “prnlog” command to obtain printer log information.
❖
Print logs display
msh> prnlog
• Displays 16 previous print jobs.
msh> prnlog "ID Number"
• Specify the ID number of the displayed print log information to display ad-
ditional details about a print job.
Reference
p.254 “Getting Printer Information over the Network”.