Ricoh LP124w, Software Manual

Page: 245 / 376

Remote Maintenance by telnet
231
6
ipv6
Use the “ipv6” command to display and configure IPv6 settings
❖
View Setting
msh> ipv6
❖
IPv6 stateless address
msh> ipv6 stateless {on|off}
• If “on” is selected, IPv6 requests information required for maintaining
stateful connection to the router for as long as the printer power is turned
on. This setting allows information from the router to be obtained con-
stantly, and periodically refreshes the effective period of the stateless ad-
dress.
lpr
Use the “lpr” command to view and configure LPR settings.
❖
View Setting
msh> lpr
❖
Checking host name when deleting the job
msh> lpr chkhost {on|off}
• If “on” is selected, you can delete print jobs only from the IP address of the
host that sent the print job. If LPR is disabled, you can also delete print jobs
sent from the IP addresses other than that of the host.