Ricoh LP124w, Software Manual

Page: 171 / 376

To Print
157
5
rcp
First, register the printer's host name in the hosts file.
c:> rcp [-b] \pass name\file name [pass name\file name...]
printer's host name:
When using a printer with the host name “host” to print a file named “file 1” or
“file 2” located in the “C:PRINT” directory, the command line is as follows:
c:> rcp -b C:\PRINT\file1 C:\PRINT\file2 host:
Note
❒
In file names, “*” and “?” can be used as wild cards.
❒
When printing a binary file, add the “-b” option.
❒
For details about a host name instead of an IPv4 address, see Network Guide.
ftp
Use the “put” or “mput” command according to the number of files to be printed.
❖
When one file is printed
ftp> put \pass name\file name
❖
When multiple files are printed
ftp> mput \pass name\file name [\pass name\file name...]
Follow the procedure below to print using the “ftp” command.
A
Formulate the printer's IP address or the host name of the hosts file printer
as an argument and use the “ftp” command.
% ftp printer's IP address
B
Enter the user name and password, and then press the
{
Enter
}
key.
For details about the user name and password, consult your network admin-
istrator.
User:
Password:
When user authentication is set, enter a login user name and password.
C
When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.