Ricoh LD520CL Operating Instructions Manual Download | Manualshive

Page: 934 / 956

background image

• This product includes software developed by Jonathan Stone and Jason R. Thorpe for the NetBSD

Project.

• This product includes software developed by the University of California, Lawrence Berkeley

Laboratory and its contributors.

• This product includes software developed by Christos Zoulas.
• This product includes software developed by Christopher G. Demetriou for the NetBSD Project.
• This product includes software developed by Paul Kranenburg.
• This product includes software developed by Adam Glass.
• This product includes software developed by Jonathan Stone.
• This product includes software developed by Jonathan Stone for the NetBSD Project.
• This product includes software developed by Winning Strategies, Inc.
• This product includes software developed by Frank van der Linden for the NetBSD Project.
• This product includes software developed for the NetBSD Project by Frank van der Linden.
• This product includes software developed for the NetBSD Project by Jason R. Thorpe.
• The software was developed by the University of California, Berkeley.
• This product includes software developed by Chris Provenzano, the University of California, Berkeley,

and contributors.

Sablotron

Sablotron (Version 0.82) Copyright (c) 2000 Ginger Alliance Ltd. All Rights Reserved.
a) The application software installed on this product includes the Sablotron software Version 0.82
(hereinafter, "Sablotron 0.82"), with modifications made by the product manufacturer. The original code
of the Sablotron 0.82 is provided by Ginger Alliance Ltd., the initial developer, and the modified code of
the Sablotron 0.82 has been derived from such original code provided by Ginger Alliance Ltd.
b) The product manufacturer provides warranty and support to the application software of this product
including the Sablotron 0.82 as modified, and the product manufacturer makes Ginger Alliance Ltd., the
initial developer of the Sablotron 0.82, free from these obligations.
c) The Sablotron 0.82 and the modifications thereof are made available under the terms of Mozilla Public
License Version 1.1 (hereinafter, "MPL 1.1"), and the application software of this product constitutes the
"Larger Work" as defined in MPL 1.1. The application software of this product except for the Sablotron
0.82 as modified is licensed by the product manufacturer under separate agreement (s).
d) The source code of the modified code of the Sablotron 0.82 is available at: http://support-
download.com/services/device/sablot/notice082.html
e) The source code of the Sablotron software is available at: http://www.gingerall.com
f) MPL 1.1 is available at: http://www.mozilla.org/MPL/MPL-1.1.html

7. Appendix

264

7

«
...
932
933
934
935
936
...
»

Summary of Contents for LD520CL





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LD520CL

Brand: QMS Pages: 160

Brand: QMS Pages: 110

Brand: QMS Pages: 158

Brand: CAB Pages: 144

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 36

Color imageCLASS MF8580Cdw

Brand: Canon Pages: 20

Color imageCLASS MF8280Cw

Brand: Canon Pages: 24

Color imageCLASS MF8080Cw

Brand: Canon Pages: 39

Color imageCLASS MF8050Cn

Brand: Canon Pages: 32

Color imageCLASS LBP7660Cdn

Brand: Canon Pages: 2

Color imageCLASS 8180c

Brand: Canon Pages: 24

Brand: Canon Pages: 30

C3000 - MultiPASS Color Inkjet Printer

Brand: Canon Pages: 41

Color imageCLASS MF8170c

Brand: Canon Pages: 2

Color imageCLASS MF8170c

Brand: Canon Pages: 98

Color imageCLASS MF8170c

Brand: Canon Pages: 8

Color imageCLASS MF8080Cw

Brand: Canon Pages: 46

Color imageRUNNER LBP5360

Brand: Canon Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands